+15 Years High-end Minimalist Furniture R &D MANUFACUTURE.

Precautions for the Use and Maintenance of Wooden Doors

The use of wooden doors and maintenance precautions The types and styles of wooden doors have become more and more with the requirements of the times. The quality of wooden doors on the market can also be said to be different. However, because of the many advantages of the wooden door, consumers usually choose wooden doors when choosing a home door. In the process of using wooden doors, we need to pay more attention and carefully maintain, so that the wooden door can avoid some quality problems caused by improper use and maintenance. So what are the attention in the use and maintenance process of wooden doors? Xiaobian will give you one by one. 1: Precautions for the use of solid wood doors in the overall cabinet and closet 1. Prec notary of the use of solid wood door 1. Products that are not painted before and do not paint. 2. Whether it is a product that needs to be trimmed before the installation and the size measurement of the wooden door, or the product that needs to be trimmed by a slight cracking, contraction, and deformation during use, it must be treated or agreed by the dealer, otherwise the dealers and factories will not bear any any of the factories. Guarantee. 3. In order to prevent the door of the door when opening and closing the door, it is recommended to install the magnetic suction under the door in time. 4. Do not hang heavy objects on the door when using wooden doors normally when customizing the wooden door or let the child hang on the door to avoid shortening the service life. 5. When the door is switched and switched, do not force too hard or open the angle. This will not only damage the wooden door, but will hurt the person in severe. 6. At the beginning of the door, gently push (or lightly pull) the wooden door with your hands, and you can also use hard objects to prevent the protective layer of the wooden door paint from being damaged. 7. Do not make the houses humid for a long time, so as not to deform wooden doors. 8. The wooden door should not be directly exposed to the strong sunlight for a long time, which will make the paint discolor, aging or stripped. 9. Wipe clean with a clean cloth when the wooden door splashes water to avoid local expansion. Do not excessive force when wiping to avoid spending paint. Two: Daily maintenance of wooden doors customized in solid wood houses 1. When removing the surface stains of the wooden door, use a soft cotton cloth to wipe it, and it is easy to scratch the surface with the hard department. When the stain is too heavy, you can use a neutral washing agent, toothpaste or furniture special cleaning agent, and then wipe it after removing the stain. Do not wash it with Lantong. 2. Pay attention to soaking in neutral reagents or watery rags. Do not place the surface time of the wooden door, otherwise it will immerse the surface and make the surface decorative materials discolored. 3. Pay attention to the edges and corners of the wooden door, do not rub too much, otherwise it will cause edges and corners to fall off. 4. The club and the lock are the activity accessories. When loosening, it should be tightened immediately. The sound of the line position should be paid attention to in time. When the lock is opened, it is not flexible to add an appropriate amount of pencil core foles to the key. 5. Due to the characteristics of dry shrinkage and dampness, if the temperature and humidity are large, if a slight cracking and contraction occur, this is a normal natural phenomenon. You do not have to panic. With the seasonal changes, this phenomenon will be this phenomenon. Natural disappearance. 6. In order to maintain the bright color of the wooden door, it should be maintained to maintain it regularly for it.

Precautions for the Use and Maintenance of Wooden Doors 1

GET IN TOUCH WITH Us
no data
recommended articles
How to Buy Indoor Wooden Doors Correctly During Decoration?
How to Buy Indoor Wooden Doors Correctly During Decoration?
In home decoration, the doors and windows still choose a wooden door. However, the wooden door not only requires more in the decoration, but also adds a lot of requirements in terms of the performance of the wooden door itself. Most people will mention the function of sound insulation when making Nantong indoor wooden doors. It is also simple and generous in the design of the wooden door. Solid wood house door customization editor believes that the style of the overall decoration design should be first clarified, and the door that is supported with it. Secondly, it should be determined according to the place of use. For example, according to the place of use and use, it can be divided into general decorative doors, louvers and glass decorative doors, etc. The entry door, safe and strong anti -theft door, solid wood composite door, all solid wooden doors; general living rooms and bedroom doors will choose high -solid wooden doors with high safety performance, overall thick and strong, mostly uses fan -type and flat -opening doors. The kitchen and toilet can choose to push -pull or folded door type. And the storage room can choose a louver door with better breathability. The color of the wooden door color wooden door should be harmonious with the room; the color of the wooden door should be contrast with the color of the wall, and keep the same color as the ground; the color of the wooden door should be close to the color of the furniture;. Wooden door -style home decoration style includes: Chinese, European, simple, etc. If the European style decoration home, the wooden door can choose the European or closer style. This combination shows the beauty and unity of the home. Wooden door materials such as red pine and elm are adapted to the decoration of general grades; water willow, wooden, and beylum are adapted to medium -grade decoration; and fir, red cricket, walnut, teak, mahogany and other luxury residential decoration. When buying, you need to identify color, texture, texture and other aspects according to different materials.
Processing and Installation of Hollow Sliding Doors!
Processing and Installation of Hollow Sliding Doors!
There are two types of hollow sliding door styles in the stainless steel mid -empty sliding door. One is the form of 45 degrees horny and the horizontal side. One sometimes requires welding angle, which is very troublesome and the results are not good. The processing of push the door in hollow, find a shop with a curved machine, measure the style, talk about the price, people will measure the size, processing quickly. Installation of the sliding door, general merchants do not have the installation and have to do it by themselves. However, the edge of the stainless steel after processing is very sharp. Be careful not to cut your hands. Just tear off the white protective film after finishing. The above information is compiled by the editor of the push door manufacturer (Editor). If you need to learn more, please log in to the website for details. Buying tips: The substrates of the border -type sliding door are generally aluminum alloy and plastic steel. Because aluminum alloy has the characteristics of light weight and high strength, it is a high -end material (Material) that moved the door substrate, which has gradually replaced plastic steel products. Aluminum alloy is divided into ordinary aluminum -magnesium and aluminum titanium magnesium alloy. Metal titanium has the characteristics of high strength, small proportion, and high toughness. Therefore, its price will be several times more expensive. In addition, high -end surface treatment has anode oxidation, electro -swinging charcoal spraying, etc. These processes have higher hardness and aesthetics than simple spray and plating. If the thickness is used as a door core with glass or silver mirror, it is generally 5mm thick; if the wooden board is used as a door core, the thickness of 10mm must be used as the best. Some manufacturers use thinner wooden boards (8mm or even 6mm) instead to save material costs. Too thin wooden boards, pushing up, it looks frivolous and shake, and the stability of is poor, and after a period of time, it is easy to warp and deform. The paint surface is sprayed and transferred to the double layer of branding, that is, the surface dust removal, removing the hybridization, which increases the adhesion of the paint surface. Simple branding, even not implanted, so the paint surface is easy to fall off, and the texture is not clear. The surface of the manufacturers of large -scale sliding doors is processed by the company (Company) by itself, and then it is treated with imported advanced technology. The product paint surface is smooth and delicate, uniform and full, and clear texture. The manufacturers of small sliding doors are the profiles of the wholesale finished product (Color) of the profile factory. The surface cannot be handled by itself. The door color does not match, the color difference is large and so on. The wooden boards (mainly fiber boards and particle plates) of the sliding doors are artificial boards. Many wall cabinet door manufacturers on the market are mostly produced in the country, and even use thick plate materials. Many plates have exceeded the content of the formaldehyde content. In the cold season in the north, when the doors and windows are closed, it has a greater impact on consumers' physical health. The slider material pulley is the most important hardware component in the sliding door. The material of the pulley on the market is plastic pulley, metal pulley and glass fiber pulley. Metal pulley is strong, but noise is easy to produce when contacting the track. Carbon glass fiber pulley contains roller bearings, smooth push slips, long -lasting wear -resistant, box -type closed structure is effective, and it is more suitable for the northern region of the wind and sand. And some low -grade sliding doors are made of organic plastic, which is easy to wear and deform. It will fluctuate at high and low in time. , It is easy to derail when pushing and pulling, it is not safe. Shake the door with the vertical direction of the sliding rail, the smaller the degree of shaking, indicating that the better its stability. When shaking, pay attention to observe the upper pulley and the upper sliding rail. If the quality (MASS) is a good sliding door, the gap between the gap between it is almost zero. Therefore, the tight combination of the upper pulley and the sliding rail determines the smoothness of its sliding. The advantages and disadvantages of the bottom wheel can only ensure that its good sliding effect and long use cycle can be guaranteed. High -end mobile sliding doors are made of carbon glass fiber, with rolling beads, with lubrication esters. The worse pulley is often made of engineering plastics or organic plastic. Obstructing, it can be easily deforming after a long time, affecting the style partition of the push -pull effect board: as a partition door, most of them are more transparent plate surfaces, which can make the space more open, take into account the decorative effect (Effect), combined with the overall room style. Cabinet doors: The materials are wooden boards, glass, mirrors and others. The height of the glass movement should not exceed 2.5 meters. The bedroom should not choose a mirror movement door. The plate movement door is simple and generous, and the security is good. The stop -stop device is generally used for stop blocking blocks, but the high -end steel properties will be stronger, and the steel is not good. After a long collision, it will produce a displacement. In fact, metal has a period of fatigue. After a long time of work, it is easy to deform, and the stop block processed from copper can be corrosion -resistant and can maintain stability for a long time. Therefore, you can choose such materials as much as possible.
What About the Market Prospects of the Narrow Frame Doors and Windows Narrowing the Door?
What About the Market Prospects of the Narrow Frame Doors and Windows Narrowing the Door?
With the emergence of young consumer forces in the post -80s and 90s, the consumer demand for aluminum (AL) alloy doors and windows markets is becoming more and more fashionable. (Mel time at 660 C) doors and windows. Therefore, the aluminum door and window market needs to continue to innovate and continuously develop new styles (style) to meet the needs of young consumers. A new aluminum alloy door window style is now emerging——Narrow -door doors and windows narrow borders to push the door. Once the product is launched, it has attracted widespread attention from young consumers. More and more consumers like to buy this product. It can be seen that the market prospects of narrow -frame doors and windows narrowing doors are optimistic and bright, and the potential is huge. Below the narrow -frame door and window manufacturers introduce the advantages of the narrow bezel doors and windows. If you need to buy or understand the narrow frame hidden frame sliding door price (Price), please contact customer service or call the narrow -frame aluminum alloy (melting point 660 C) doors and windows have many advantages: 1. Simple and fashionable. The minimalist style is further close to the aesthetic and experience needs of the younger generation. 2. Space (Space) is spacious to reduce a sense of depression. Put in the kitchen, the narrow frame can look wider in the room, and it is installed on the balcony to watch the visual view more. The narrow frame makes users feel more relaxed and less depressed. 3. Good lighting, enhance indoor brightness. The width of the frame decreases, which increases the light that the sun enters the room, making the room brighter, and also reduces a sense of depression. 4. Increase the wall thickness of the type to ensure the strength. Many people are worried that the width of the door fan frame will reduce the intensity of the door fan. To this end, the wall thickness of the profile is deliberately increased, and there is a reinforcement to ensure the overall strength. 5, 45°Connect, beautiful and elegant. The horizontal vertical and horizontal (referring to the vertical and horizontal, can also be done anyway) 45 between the fan frame°Connect, not right -angle connection to ensure beauty. 6. Use stainless steel guide rail, wear resistance and corrosion. 7. Swimming with porcelain, the light is not dazzling, the vision is more comfortable. Black is also a more popular color now, low -key and simple, without strong reflection, and it looks more casual. From this we can see that the narrow -frame doors and windows (D & W) styles are unique (interpretation: unique, special), charming design, minimalist style (style), simple but not simple, in line with modern people's aesthetics, the aesthetics of modern people, At the moment, there is a market prospect. In addition, the current narrow bezel products (PRODUCT) on the market is not saturated, so if you want to act as a narrow -frame door and window. Doors and windows, the first brand of fashion doors and windows is a manufacturer of aluminum aluminum doors and windows, broken bridge aluminum doors and windows, sun room, heavy sliding doors. The product series is basically complete and novel (Novel) unique (interpretation: unique, special). Pay attention to the quality of the product (MASS), service and innovation. Nowadays, the door and window industry is seriously homogenized and the service is not in place. Only in many doors and windows brands stand out (all skills are revealed) to win the market. There are currently large problems in the doors and windows markets are services and quality. The quality is mainly the quality of installation and the quality of the product. Once these two areas have problems, it is difficult to based on the service and quality of quality. The doors and windows are grasping these points to highlight the siege among many doors and windows. Related recommendations: Narrow -door doors and windows narrow borders, is it good? Which hidden frame is better?
Narrow -door Doors and Windows Narrow Borders to Push the Door?
Narrow -door Doors and Windows Narrow Borders to Push the Door?
A new aluminum alloy (Melly Point 660 C) doors and windows (D & W) style (D & W) style is now arising.——Narrow -door doors and windows narrow borders to push the door. Once the product is launched in the market, it has attracted the attention of young consumers (Extensive). More and more consumers like to buy this product. It can be seen that the market prospects of narrow -frame doors and windows narrowing doors are optimistic and bright, and potential (referring to the possibility of personal ability development) is huge. Let's introduce the advantages of the narrow bezel doors and windows. Which hidden frame is better? There is a 2.8 extremely narrow black narrow box sliding door (hidden frame movement door) at the moment of our doors and windows. If you need to buy or understand the narrow frame hidden frame, please contact the online customer service or dial. Narrow frame doors and windows (D & W) narrow borders, is it good? Narrow frame sliding door is full of fashion, simple but not simple, avant -garde look. If you use this narrow -frame door and window at home, I believe your relatives and friends will also like it when you see it. Put in your own house. Narrow frame sliding doors have many advantages: 1. Simple and stylish. The minimalist style (Style) is further close to the aesthetic and experience needs of the younger generation. 2. The space vision is spacious, and the sense of depression is reduced. Put in the kitchen, the narrow frame can look wider in the room, and it is installed on the balcony to watch the visual view more. The narrow frame makes users feel more relaxed and less depressed. 3. Good lighting, enhance the brightness of the indoor (Indoor). The width of the frame decreases, which increases the light that the sun enters the room, making the room brighter, and also reduces a sense of depression. 4. Increase the wall thickness of the type to ensure the strength. Many people are worried that the width of the door fan frame will reduce the intensity of the door fan. To this end, the wall thickness of the profile is deliberately increased, and there is a reinforcement to ensure the overall strength. 5, 45°Connect, beautiful and elegant. The horizontal vertical and horizontal (referring to the vertical and horizontal, can also be done anyway) 45 between the fan frame°Connect, not right -angle connection to ensure beauty. 6. Use ttw guide (TTW Guide), wear resistance (nàI mó) Corruption (interpretation: refers to rot, disappear, erosion, etc.). 7. Collocation porcelain swimming is black, light is not dazzling, and the vision is more comfortable. Black is also a more popular color (Color). It is low -key and simple, without strong reflection, and it looks more casual. From this we can see that the narrow -frame doors and windows (D & W) style (Style) novel (Novel) unique (interpretation: unique, special), charm design (design), minimalist style, simple but not simple, in line with modern people The aesthetics are very market prospects at the moment. In addition, the current narrow bezel products (PRODUCT) have just been launched, so they have not saturated.
How to Choose Sliding Door Pulley Accessories
How to Choose Sliding Door Pulley Accessories
How to choose the sliding door of the sliding door pulley accessories, there are 4 wheels with a single sliding door single fan. Regardless of the door of a single glass, the door of the double glass is still the sliding door on the closet. There are two on the top and bottom, but the size is different. Pulmon push door pulley (Pulley) is one of the important hardware of the sliding door. Whether it is selected or device, we do not pay much attention to this small part, but a large part of the life of the sliding door (Lifetime) is a part of the lifetime (LIFETIME) is a part of the lifetime (LIFETIME). Pulle. So how should we choose the sliding door pulley accessory? Choosing the material of the sliding rail, the sliding rail materials sold in the market are different. Most of the sliding rails are aluminum (al) alloy (aluminum) material (melting point 660 C) material, and a small part of the sliding rail will be made of steel made of steel. The sliding rails of the alloy material are also divided into ordinary and thick types. This should be determined according to the material used. The weight of the door is relatively heavy, so you need to choose a thickened sliding rail to ensure the use of (USE) security (SAFE). Note that the quality (MASS) when selecting the pulley (MASS), as an important accessory that cannot be ignored by the sliding door, the quality of the pulley will greatly affect the quality of the door push -pull. Safe), noise. The quality of the outer wheel and bearing (Bearing) directly affects the overall figure of the pulley (Physique). Most of the outer wheels are nylon fiber (FIBER) or all steel texture. The steel pulley is relatively strong, but there will be movements when pulling. There is no sound when the nylon fiber pulleys are pulled, but the pulley of the steel is not resistant to the steel wheels. grind. The material of the bearing is also different. Good pulley bearings are made of stainless steel (stainless acid -resistant steel). The bearing device is tight, and the feel is soft when sliding. There is no noise. The distance makes the contact between the door and the track closer. The quality of the small pulley at the bottom of the door is also different. The technology of the technology is light and convenient.
How to Choose the Sliding Door?
How to Choose the Sliding Door?
Pushing the sliding door is slowly occupying the decoration market, which should pay attention to the problem in the process of selecting the process. Let me introduce the pushing door manufacturer in detail: 1. Select (Select) Push Polish Play Piece Plucking Push Push List. Style of the door. Only if you have a good opinion of this door, you will think about continuing to understand this. The style of the sliding door should be matched according to your personal preferences and decorations. If the style and style are incompatible, it is equivalent to a beautiful face with a dog skin plaster. 2. Select color. Collocation (color) is the customer (Kèreturnù) Choose the problem of tangled when selecting the sliding door. Sometimes it s the same as the color of the wooden door or wooden mouth? In fact, it is not necessary. If the color of the wooden door you choose is relatively special, it will be difficult to find the same color push door. If you choose a red port on your home, you can actually choose a white sliding door to match, which is also a different flavor matching. White is versatile. Try to avoid two different heavy color matching. 3. Look at the thickness of the profile. The thickness of the general profile is divided into national standards and non -national standards. Need to measure with U -standard card ruler. The same series of non -standard is thinner than the national standard. Most of the general family doors are 1.4. In fact, the national standard 1.2 can meet the requirements of 2.3*2.3 to do two fans. 4. Look at the cross section. The price of the same series in the market (Price) is high and low. However, please remember a sentence, never out of date. ; One point is a price and one point "; there is no fool who does business, you will not do the sale of money. Don't be cheap. Why look at the cross -section of the profile? The profile is divided into native and regeneration. The native cross -section is bright, and the regenerative luster is dark. Regenerative profiles are much worse than native profiles in overall and structured. 5. Watch the pulley (pulley). Plums are the key and easy to be ignored. The good sliding door is the upper and lower fibrous wheels up and down. The last round can be adjusted (Adjust) (Sometimes you push the door sink, it does not mean that the material is thick, it may be too tight. ), Start -oriented role. The next wheel is pushed up and not beating well. Dago (hanging door) has basically withdrawn from the market, so don't consider (consider). 6. Select glass (Glass). For the safety of the family, the glass must be tempered. Pushing doors generally use standard 5mm tempered. Some small workshops use 4mm tempered, and the quality of the door (MASS) is greatly reduced (Reduce).
How to Choose Good Quality Sliding Door Pulleys
How to Choose Good Quality Sliding Door Pulleys
The pulley is one of the main hardware of the hollow sliding door. The quality of the pulley determines the life life (LIFETIME) of the sliding door. Low -quality pulley usually uses general engineering plastics (structure: synthetic resin, plastic increase The agent, stabilizer, color material), simple cracking, the center does not choose bearing (bearing), but to reflect the lubricating oil. There will also be a blocking scene. Pushing the sliding door cannot slide. Some will use the general axis toherm. When it is not to the extent, the door will be sinking at the time of push pull. The raw material (RAW MATERIAL) is different. See the section to select the sliding door. The profile is divided into two types: aluminum -magnesium alloy and push -sliding door regeneration aluminum. The thickness can exceed 1mm, while the low -equal profile is regenerative aluminum, and the toughness and the useful life are not good. Aluminum -magnesium alloy materials are mostly used in primary colors and do not add coatings. Some merchants often choose recycled aluminum in order to fill in the secondary. The surface coloring method of the profile, so before consumer purchase, let the sliding door manufacturer show the product type of product type breaking surface to determine the real material. Pushing doors have been widely used in architecture industry. Nowadays, modern home concepts are increasingly inclined to save space. It can be customized and environmentally friendly and practical. In addition to sealing, it is better to give a space isolation and increased privacy to the living room, kitchen, balcony, and other positions. There are many types of sliding doors and different prices. How can I choose?. The sources of sliding doors on the market are divided into three types: domestic, OEM and foreign imports. Push door manufacturers remind consumers to pay attention to the identification (attention), domestic hardware, sliding door profiles and other raw materials (RAW MATERIAL) are all in production. Assembly, the price is usually below 450RMB/. Consumers can choose according to their own needs, but because some brands in the market are under the banner of imports and collects false prices. Therefore, when buying imported brands At the same time, consult the original manufacturer packaging, website and other information. The pulley is usually installed at the bottom of the titanium (TI) magnesium alloy push door. One pulley is divided into two parts, one is the bearing, and the other is the bearing outer layer. The imported light steel roller bearing, and the bearing indicates the manufacturer and product model, there are markers on the side of the bearings, the steel sleeve outside should also have its own company's logo. What is the difference, but after a long time, there are obvious differences. Now there is also a kind of no bearing pulley with a center, only applying lubricating oil to achieve the effect of sliding through mechanical friction. The doors and windows are a specialty (Specialty) production (Produce) installation of KFC Gate, Grand Pavilion, automatic door, parking lot management system, broken bridge aluminum (AL) doors and windows, sun rooms, floor reeds, glass partitions, sliding doors (titanium beauty push push push push push push sliding The door of the door, the toilet sliding door). Adhering to; the business philosophy of quality (chaper); the high quality as the core vitality of the enterprise, so that consumers' interests can be reliably guaranteed.
How to Distinguish Between Moving Doors and Sliding Doors
How to Distinguish Between Moving Doors and Sliding Doors
The concept of common consumers (Consume) about moving doors and sliding doors is very vague. It is almost the difference between moving the door and the sliding door. Not only wooden doors, even some people in the industry. Door concept. The following push door manufacturers will introduce the difference between moving doors and sliding doors: 1. Use the use of the door as a cabinet door, cloak room door, wall cabinet door, interval door, bathhouse door, etc.; Being a balcony door, kitchen door, and hygienism (Hygienism), can also be used for home entry doors, etc. Second, door sleeves and wiring door movement only have interval function, generally there is no door cover and kit; sliding doors not only want to find the interval function, but also require the functions of seal, heat preservation, sound insulation, etc., so generally there are generally available The door sleeve and the thread, and the frame of the door sleeve is evoked, sealing (seal) is stronger. Third, locks (use: anti -theft, protection of personal privacy) do not lock the door, push door multi -device (Device) lock. Fourth, Pulley (Pulley) moved the door generally up and down wheels, and the sliding door generally only has a sliding wheel. Fifth, the thickness of the profile and the sliding door now uses aluminum (AL) alloy, aluminum -magnesium (chemical MG) titanium (TI) alloy (Means) to the most frame data (Means). Generally speaking It is thinner, mostly 0.8mm 1.0mm thick profile, and the thinnest profile of the sliding door is 1.0mm thick, the thickest point is even 1.8mm thick, the sliding door is larger, and it is more consolidated. Stronger.
How to Buy Kitchen Glass Sliding Doors?
How to Buy Kitchen Glass Sliding Doors?
Modern home concepts choose to save space (Space) decoration, choose the materials of Environmental Protection, and tailor -made sliding doors to make home more energy -saving space. Pushing doors are not only the first choice for closed, but also increased privacy. How to buy high -quality sliding doors? First of all, let's take a look at what glass is good for the kitchen sliding door. Fifth: The sources of sliding doors on the sample data market are divided into three types: domestic, domestic OEM and foreign imports. Experts remind consumers to pay attention to the place where they are selected. Domestic hardware, profiles and other raw materials are produced and assembled in China (Produce), and the price is generally below 450 yuan / square meter; and domestic OEM refers to Hardware and profiles are mostly domestic production and assembly, and the price is generally 450-1000 yuan / square meter; brands imported from abroad, hardware and profiles are imported from original, the product quality is relatively high, and the price is generally 1000-3500 yuan / square meter. Consumers can choose according to their own needs, but because some brands in the market are under the banner of imports and collects false prices, when buying imported brands, they should observe the sections and samples of the samples up close, while inquiring the native origin, and at the same time, they should query native origin. Manufacturers' packaging, website and other information. Sixth: Picking edges The popular rubber strips on the market include PVC rubber and Silicon gel. Silica (Silica) has a better effect and does not corrode profiles, glass and core plates. In addition, the PVC sealing band is firm, the surface is flat, the color is realistic, the color is not lost, it will not fall off and deform. Summary: Kitchen glass sliding doors, the use of glass movements in the kitchen will increase the space at home visually. Municipal Door and Window (D & W) Co., Ltd. was founded in 2009. It is located in Nanhai Luo Village, known as the Chinese aluminum capital. It is a modern high -tech enterprise integrating R & D, production and sales. The product covers a series of products such as mid -to -high -end aluminum alloy doors and windows, hanging doors, sliding doors, folding doors, windows, sun rooms, etc.
What Should You Pay Attention to When Using the Sliding Door
What Should You Pay Attention to When Using the Sliding Door
Pay attention to the time when using the sliding door. I will hope that my furniture (Furniture) style is ingenious, with good beauty and benefits (Benefit). At the time of the use of the sliding door, there will be many needs to pay attention to. This time, the sliding door manufacturer said that when the sliding door is used, pay attention to it. 1. Use the sliding door from the landing to the top (the bright crane rail box). Because the swinging of the swing is too large, the sliding door is easy to deform at all times, and the deformation back door cannot be opened, which means that it cannot be corrected and cannot be used. 2. For users who use suspension sliding doors, the top of the sliding door generally requires a reinforced structure (BASE COURSE) processing. (Engineering structure) Reinforcement. 3. The golden size of the normal sliding door is about 800*2000 mm. The sliding door structure under this size is the most stable. Manufacturing (zhìexistào) Pluck the door, reduce its width, and then use more door fans to insist on stability and use safety of sliding doors. 4. The style of the sliding door (Style) is shown through the door frame, and the door fan is not much different at all. Secondly, because the ground to the top surface is generally about 255 cm, the height of the normal door is generally between 195-215 cm. Pushing doors need to be planned in combination with the indoor structure and space (Space) to avoid affecting the entire visual aesthetics. The aesthetic sensitivity of the sliding door is very high, and reasonable use will also be a very good choice. But when the sliding door is used, the needs of the sliding door are based on the way we like and the way we feel. Attention points for the use of sliding doors (attention). In order to choose better sliding doors, you must pay attention to the use points of these sliding doors.
no data
BK CIANDRE is a professional ceramic table manufacturer and minimalist furniture R &D solution global provider.
Subscribe
Subscribe If you want to be our partner, please do not hesitate, our story will start with your contact.
Contact Us
Angela Peng
+86 135 9066 4949
Factory address : No. 7 Bo'ai East Road, Nanhai District, Foshan City, Guangdong Province
Office address : Room 815, Building T9,Smart New Town,ZhangCha Town, Chan Cheng District, Foshan City, Guangdong Province,China
If you have a question, please contact at
Copyright © 2022 Guangdong BKX Smart Furniture Co.,Ltd. | Sitemap